The Eagle T20CFL is a fully automatic case erector designed specifically for larger corrugated cartons. It automatically opens, squares, folds and tape-seals the bottom of each case in approximately three seconds. Therefore, it can substantially reduce the labor and time required to prepare oversized cartons manually.
Additionally, the vertical carton magazine allows operators to replenish flat cases without stopping production. As a result, the Eagle T20CFL supports a continuous packaging workflow at speeds of up to 12 cases per minute.
The Eagle T20CFL combines large-case capacity with automatic forming and bottom sealing. Consequently, it provides a dependable solution for facilities that need consistent cartons without relying on repetitive manual forming.
Key advantages include:
First, the operator loads flat corrugated cases into the vertical storage magazine. The Eagle T20CFL then retrieves one carton, opens it and squares it automatically.
Next, the machine folds the front, rear and side bottom flaps. It then applies tape to seal the bottom before discharging the completed case. Therefore, each carton leaves the machine open at the top and ready for product loading.
Meanwhile, operators can replenish the carton magazine while the machine continues running. This continuous-loading design helps reduce interruptions and maintain consistent packaging flow.
The Eagle T20CFL accommodates a substantially wider case range than the standard T20CF. Moreover, operators can manually adjust the machine for different carton dimensions in less than two minutes.
The published case range includes:
Because carton construction and proportions can affect machine performance, Ameripak can review case dimensions or sample cartons before confirming compatibility.
Facilities handling smaller standard-sized cartons may instead consider the Eagle T20CF fully automatic case erector.
| Specification | Standard Configuration |
|---|---|
| Equipment Type | Fully automatic large-case erector and bottom sealer |
| Production Speed | Up to 12 cases per minute |
| Forming Cycle | Approximately 3 seconds per case |
| Carton Length | 13.5″ to 26.5″ |
| Carton Width | 5.5″ to 24.75″ |
| Carton Height | 10″ to 28.5″ |
| Tape Width | 2″ or 3″ |
| Operator Interface | 7″ color touchscreen |
| Electrical Requirement | 110 VAC, 50/60 Hz |
| Air Pressure Requirement | 85 PSI minimum |
| Machine Dimensions | 86.6″ L × 80.7″ W × 53″ H |
| Machine Weight | Approximately 881.8 lbs. |
| Operating Temperature | 32°F to 104°F |
| Maximum Operating Humidity | 90% |
| Operating Noise | 75 dB(A) or less |
| Frame Construction | Heavy-duty steel |
| Safety System | Five-point emergency-stop system and enclosed access doors |
Specifications may vary according to the final machine configuration and application requirements.
The enclosed frame separates operators from moving machine components during automatic operation. Additionally, safety access doors provide convenient entry for adjustments, cleaning and routine maintenance.
A five-point emergency-stop system gives personnel several locations for quickly stopping the machine. Meanwhile, the 7″ color touchscreen provides straightforward access to operating functions and adjustments.
The self-cleaning system also helps prevent corrugated dust from entering sensitive pneumatic components. Consequently, this design can reduce cleaning requirements and support more dependable operation.
The Eagle T20CFL suits packaging operations that repeatedly form larger uniform cartons. For example, it can support:
However, not every operation requires a fully automatic system. Facilities with moderate production volumes may benefit from the Eagle T10CF semi-automatic carton erector, which provides operator-assisted case forming and loading.
Manually forming large cartons can require considerable time and physical effort. In addition, inconsistent folding may produce cases that do not move smoothly through downstream packaging equipment.
The Eagle T20CFL creates a repeatable case-forming process while reducing hands-on carton preparation. As a result, employees can focus on loading, inspection and other production responsibilities.
Ameripak’s Packaging Automation and Throughput Guide provides additional guidance for evaluating labor requirements, packaging bottlenecks and the appropriate level of automation.
Ameripak brings more than 40 years of experience in packaging machinery, production flow and end-of-line automation. Therefore, our team can evaluate carton sizes, required throughput, available floor space and downstream equipment before recommending a final configuration.
Additionally, Ameripak can assist with equipment selection, installation planning, operator training, replacement parts and technical service. Customers receive both the Eagle T20CFL and the ongoing support of an experienced, family- and veteran-owned packaging equipment partner.
Inquire about the Eagle T20CFL
