The M-60X6 fully automatic strapping machine delivers fast, repeatable polypropylene strapping for cartons, bundles, and packaged products. Specifically, it completes approximately 30–32 strapping cycles per minute and applies electronically adjustable tension from 5 to 75 kilograms. Therefore, it provides a productive step beyond semi-automatic strapping equipment.
An enclosed arch automatically feeds the strap around the package. Then, the machine tensions, heat-seals, and cuts the strap to complete the cycle. As a result, the M-60X6 reduces operator handling while improving strap placement and consistency.
Automatic strap feeding prepares the machine for operation without requiring the operator to thread the entire arch manually. In addition, the auto-positioning and retry function helps return the strap to its proper location. Because the system can retry the feed sequence, minor feeding interruptions do not always require immediate manual correction.
A jam-free loop-ejection function helps clear unsuccessful strap loops. Consequently, operators can recover from common feed problems more quickly. Electronic tensioning also allows adjustment from approximately 11 to 165 pounds of force.
Key performance features include:
The standard aluminum-alloy arch measures 800 millimeters wide by 600 millimeters high. Therefore, it provides approximately 31.5 by 23.6 inches of internal arch capacity. Its modular construction also simplifies arch assembly, disassembly, and size-related servicing.
With the aluminum arch, available package dimensions range from 100–750 millimeters wide and 30–575 millimeters high. In comparison, the iron arch-cover configuration accommodates packages from 100–700 millimeters wide and 30–550 millimeters high.
Actual package suitability also depends on weight, stability, strap position, surface condition, and required tension. Consequently, buyers should size the machine around their largest and smallest production packages rather than the arch opening alone.
Operators can initiate a strap cycle through the start switch, table ball switch, or internal foot-pedal bar. For example, the foot-pedal control allows hands-free activation while the operator positions a carton. Meanwhile, the table ball switch supports efficient cycling as packages move across the work surface.
The motor automatically stops when the machine remains idle. As a result, the M-60X6 can reduce unnecessary motor operation between packaging runs. A lift-style top cover also provides convenient access for inspection, cleaning, and routine maintenance.
| Specification | Details |
|---|---|
| Machine type | Fully automatic arch strapping machine |
| Recommended strap | Polypropylene |
| Strap-width range | 6–15 mm |
| Cycle rate | Approximately 30–32 cycles per minute |
| Tension range | 5–75 kg, approximately 11–165 lb |
| Aluminum arch | 800 × 600 mm |
| Approximate aluminum arch | 31.5″ W × 23.6″ H |
| Iron arch cover | 750 × 575 mm |
| Aluminum-arch package range | 100–750 mm W × 30–575 mm H |
| Iron-arch package range | 100–700 mm W × 30–550 mm H |
| Machine dimensions | 1240 × 580 × 1475 mm |
| Approximate dimensions | 48.8″ × 22.8″ × 58.1″ |
| Table height | 805 mm, approximately 31.7″ |
| Net weight | 190 kg, approximately 419 lb |
| Sealing method | Heat seal |
| Published electrical supply | 415 V, three phase |
Electrical configurations may vary by destination and supplied machine. Therefore, facilities should confirm voltage, frequency, phase, amperage, disconnect, and circuit requirements before installation.
The M-60X6 suits manufacturing facilities, warehouses, fulfillment operations, distribution centers, and shipping departments that need repeatable arch strapping. In addition, its adjustable tension and 6–15 millimeter strap range support different carton strengths and package requirements.
Companies that do not need an enclosed arch can compare the EMC-45ND semi-automatic strapping machine or the EMC-20ND semi-automatic strapping machine. However, operations evaluating another automatic arch configuration can also review the JN-85UT fully automatic strapping machine.
Ameripak evaluates package dimensions, strap width, required tension, electrical service, cycle rate, and material flow before equipment selection. As a result, customers receive a strapping system matched to their actual production process.
In addition, Ameripak can support equipment setup, operator training, replacement parts, preventive maintenance, and polypropylene strap selection. Therefore, customers gain one knowledgeable source for the machine and its continuing operating requirements.
Inquire about the M-60X6
